CostRange
Tulsa, OK

Asphalt Driveway Paving Cost in Tulsa, OK (2026)

Updated 2026 · localized estimate

Across Tulsa, a typical price to pave an asphalt driveway falls between $2,250 and $3,900, centering on roughly $2,900. That places local pricing about 7% below the U.S. average for this project.

Typical Asphalt Driveway Paving in Tulsa
$2,250 - $3,900
$2,250
Low
$2,900
Average
$3,900
High

Per sq ft in Tulsa: $5-$5. Figures above assume a 600 sq ft driveway (600 sq fts).

Why Asphalt Driveway Paving costs differ in Tulsa

Desert heat drives specific material and scheduling choices in the Southwest, though base labor rates remain moderate in most metros. With a local cost index slightly below the national baseline, labor-driven work here tracks accordingly - which is why our estimate for Tulsa differs from a flat national number.

Contractor demand and licensed-pro availability in the Tulsa area push asphalt driveway paving to about 7% below the U.S. average. Always confirm what a quote includes - removal, permits, and disposal are the most common add-ons.

EstimateLowAverageHigh
Tulsa (localized)$2,250$2,900$3,900
U.S. national average$2,400$3,150$4,200

Labor vs. materials in Tulsa

On a typical asphalt driveway paving in Tulsa, OK, here is roughly how the average of $2,900 divides between labor and parts. Because local wages drive the labor line, this split is a big part of why pricing in Tulsa differs from other metros.

ComponentEstimated costShare
Labor$1,55053%
Parts & materials$1,35047%

What affects the price

Asphalt driveways are priced per square foot installed, including grading and a compacted base. Thickness, drainage, and removal of old paving affect the total.

Tips for Tulsa homeowners

When you request quotes in Tulsa, ask each contractor to itemize labor, materials, permits, and disposal separately. That makes it much easier to compare bids and to spot where a asphalt driveway paving quote is padded.

Asphalt Driveway Paving in Tulsa: FAQ

How much does Asphalt Driveway Paving cost in Tulsa, OK?
In Tulsa, OK, Asphalt Driveway Paving typically costs $2,250 to $3,900, averaging about $2,900. Your exact cost depends on scope and the provider - get two or three local quotes.
Is Asphalt Driveway Paving more expensive in Tulsa, OK than the U.S. average?
No, in Tulsa, OK it runs about 7% below the national average, thanks to lower local labor rates.
Asphalt or concrete driveway?
Asphalt costs less upfront and is faster to install; concrete lasts longer but costs more.
How long before I can drive on new asphalt?
Light use is usually fine after 1-3 days; full cure takes several weeks.
How long does an asphalt driveway last?
With sealing every few years, 15-20 years is typical.

Asphalt Driveway Paving prices near Tulsa

How Asphalt Driveway Paving pricing in Tulsa, OK compares with nearby metros:

CityTypical average
Tulsa, OK (this page)$2,900
Oklahoma City, OK$2,900View
Houston, TX$3,100View
Phoenix, AZ$3,150View
San Antonio, TX$3,100View
Dallas, TX$3,100View

Related project costs in Tulsa

Estimates are localized for Tulsa, OK using our regional cost index and 2026 national baselines. They are informational, not quotes. See our methodology.