CostRange
Frisco, TX

Asphalt Driveway Paving Cost in Frisco, TX (2026)

Updated 2026 · localized estimate

Expect to spend somewhere between $2,350 and $4,100 to pave an asphalt driveway in Frisco, TX, though the average sits closer to $3,100. That places local pricing about 2% below the U.S. average for this project.

Typical Asphalt Driveway Paving in Frisco
$2,350 - $4,100
$2,350
Low
$3,100
Average
$4,100
High

Per sq ft in Frisco: $5-$5. Figures above assume a 600 sq ft driveway (600 sq fts).

Why Asphalt Driveway Paving costs differ in Frisco

High summer demand and rapid population growth in the Southwest can tighten contractor availability and nudge quotes upward in peak season. With a local cost index close to the national baseline, labor-driven work here tracks accordingly - which is why our estimate for Frisco differs from a flat national number.

Contractor demand and licensed-pro availability in the Frisco area push asphalt driveway paving to about 2% below the U.S. average. Always confirm what a quote includes - removal, permits, and disposal are the most common add-ons.

EstimateLowAverageHigh
Frisco (localized)$2,350$3,100$4,100
U.S. national average$2,400$3,150$4,200

Labor vs. materials in Frisco

On a typical asphalt driveway paving in Frisco, TX, here is roughly how the average of $3,100 divides between labor and parts. Because local wages drive the labor line, this split is a big part of why pricing in Frisco differs from other metros.

ComponentEstimated costShare
Labor$1,70055%
Parts & materials$1,40045%

What affects the price

Asphalt driveways are priced per square foot installed, including grading and a compacted base. Thickness, drainage, and removal of old paving affect the total.

Tips for Frisco homeowners

In Frisco, mid-week or off-peak scheduling can sometimes lower a asphalt driveway paving quote, since crews price their busiest periods higher. It is worth asking whether flexible timing earns a discount.

Asphalt Driveway Paving in Frisco: FAQ

How much does Asphalt Driveway Paving cost in Frisco, TX?
In Frisco, TX, Asphalt Driveway Paving typically costs $2,350 to $4,100, averaging about $3,100. Your exact cost depends on scope and the provider - get two or three local quotes.
Is Asphalt Driveway Paving more expensive in Frisco, TX than the U.S. average?
No, in Frisco, TX it runs about 2% below the national average, thanks to lower local labor rates.
Asphalt or concrete driveway?
Asphalt costs less upfront and is faster to install; concrete lasts longer but costs more.
How long before I can drive on new asphalt?
Light use is usually fine after 1-3 days; full cure takes several weeks.
How long does an asphalt driveway last?
With sealing every few years, 15-20 years is typical.

Asphalt Driveway Paving prices near Frisco

How Asphalt Driveway Paving pricing in Frisco, TX compares with nearby metros:

CityTypical average
Frisco, TX (this page)$3,100
Houston, TX$3,100View
San Antonio, TX$3,100View
Dallas, TX$3,100View
Fort Worth, TX$3,100View
Austin, TX$3,100View

Related project costs in Frisco

Estimates are localized for Frisco, TX using our regional cost index and 2026 national baselines. They are informational, not quotes. See our methodology.