CostRange
Abilene, TX

Asphalt Driveway Paving Cost in Abilene, TX (2026)

Updated 2026 · localized estimate

Expect to spend somewhere between $2,350 and $4,100 to pave an asphalt driveway in Abilene, TX, though the average sits closer to $3,100. That places local pricing about 2% below the U.S. average for this project.

Typical Asphalt Driveway Paving in Abilene
$2,350 - $4,100
$2,350
Low
$3,100
Average
$4,100
High

Per sq ft in Abilene: $5-$5. Figures above assume a 600 sq ft driveway (600 sq fts).

Why Asphalt Driveway Paving costs differ in Abilene

Desert heat drives specific material and scheduling choices in the Southwest, though base labor rates remain moderate in most metros. With a local cost index close to the national baseline, labor-driven work here tracks accordingly - which is why our estimate for Abilene differs from a flat national number.

Homeowners around Abilene should expect asphalt driveway paving to come in about 2% below the U.S. average, driven mainly by local labor rates and permit fees. Scheduling in the off-season can occasionally trim a few percent off a quote.

EstimateLowAverageHigh
Abilene (localized)$2,350$3,100$4,100
U.S. national average$2,400$3,150$4,200

Labor vs. materials in Abilene

On a typical asphalt driveway paving in Abilene, TX, here is roughly how the average of $3,100 divides between labor and parts. Because local wages drive the labor line, this split is a big part of why pricing in Abilene differs from other metros.

ComponentEstimated costShare
Labor$1,70055%
Parts & materials$1,40045%

What affects the price

Asphalt driveways are priced per square foot installed, including grading and a compacted base. Thickness, drainage, and removal of old paving affect the total.

Tips for Abilene homeowners

Before signing off on asphalt driveway paving in Abilene, confirm exactly what is included. Permits, haul-away of old materials, and cleanup are the line items most often left out of a headline price.

Asphalt Driveway Paving in Abilene: FAQ

How much does Asphalt Driveway Paving cost in Abilene, TX?
In Abilene, TX, Asphalt Driveway Paving typically costs $2,350 to $4,100, averaging about $3,100. Your exact cost depends on scope and the provider - get two or three local quotes.
Is Asphalt Driveway Paving more expensive in Abilene, TX than the U.S. average?
No, in Abilene, TX it runs about 2% below the national average, thanks to lower local labor rates.
Asphalt or concrete driveway?
Asphalt costs less upfront and is faster to install; concrete lasts longer but costs more.
How long before I can drive on new asphalt?
Light use is usually fine after 1-3 days; full cure takes several weeks.
How long does an asphalt driveway last?
With sealing every few years, 15-20 years is typical.

Asphalt Driveway Paving prices near Abilene

How Asphalt Driveway Paving pricing in Abilene, TX compares with nearby metros:

CityTypical average
Abilene, TX (this page)$3,100
Houston, TX$3,100View
San Antonio, TX$3,100View
Dallas, TX$3,100View
Fort Worth, TX$3,100View
Austin, TX$3,100View

Related project costs in Abilene

Estimates are localized for Abilene, TX using our regional cost index and 2026 national baselines. They are informational, not quotes. See our methodology.